Annals and Essences of Dentistry
Open Access

Abstract

COMPARATIVE STUDY OF DIMENSIONAL ACCURACY OF THREE CONVENTIONAL DENTURE BASE RESINS PROCESSED BY CONVENTIONALMETHOD ANDMICROWAVE POLYMERIZATION

Naveen S Yadav

Statement of Problem: Poor adaptations of acrylic resin denture bases to the supporting tissues markedly decrease denture retention. Several denture base resin and processing techniques have been introduced to the profession, each claiming to produce a more accurate base. Microwave processing techniques has been introduced claims to minimize the dimensional changes. Purpose: The purpose of this study was to compare the dimensional accuracy of three denture base resins processed by conventional water bath method and by use of microwave energy. Material and method: Three Poly (MethylMethacrylate) heat cure resins were selected for this study.These resins were processed by (i) conventional water bath technique for 1.5 hours at 1650F and half hour at 2120F and (ii) microwave energy for 3 mins at 500W. A metal master die representing a maxillary arch with 4mm hole was prepared to evaluate the adaptation of the test resin denture base. A total number of 60 specimens were tested. The measurements of acrylic resin denture base specimens were compared with the measurements of master metal die dimension keeping it as a standard measurement. Results: The resin record bases processed by microwave curing method had slightly better dimensional accuracy than conventionally processed bases. There was no significant difference found in the dimensional accuracy when Resin record bases processed with a specially formulated resin for microwave curing was microwave cured and when conventionally available resins were processed by microwave technique. Conclusion: The resin record bases processed by microwave curing method had slightly better dimensional accuracy than the conventionally processed bases.

Published Date: 2011-03-31;