Journal of Fundamentals of Renewable Energy and Applications

Journal of Fundamentals of Renewable Energy and Applications
Open Access

ISSN: 2090-4541

+44 1300 500008

Biomethane, variables and wastes conversion: Optimal process conditions for enhanced biomethanation of animal and fruit wastes


International Conference on Renewable Energy and Resources

July 24-25, 2017 Vancouver, Canada

Oluwafunmilayo O Aworanti

Ladoke Akintola University of Technology, Nigeria

Posters & Accepted Abstracts: J Fundam Renewable Energy Appl

Abstract :

Biomethanation of animal and fruit wastes is an environmental benign and cheap source of energy. However, biomethanation has the problem of large hydraulic retention time and low gas production which has led to its underutilization. Therefore, research is focused on biomethanation enhancement for efficient and high yield biomethane production. Laboratory scale batch anaerobic digester was used to investigate the effects of operating variables [Total Solid Content (TSC), Temperature (TEMP), Agitation (AGT) and Feed/Inoculum Ratio (FIR)] on biomethane generation from mixture of animal wastes (cattle dung, pig dung and poultry droppings), co-substrates (orange, mango and pineapple wastes) and (chicken rumen). 5 different slurries [Animal and Orange wastes with Inoculum (AOI); Animal and Mango wastes with Inoculum (AMI); Animal and Pineapple wastes with Inoculum (API); Animal and the three fruits wastes with Inoculum (AOMPI) and Animal wastes (A)] were charged into the digester. The processes were carried out for 70 days at these conditions TSC (2-10%), TEMP (25-60oC), AGT (35-70 rpm) and FIR (1:1, 1:2, 1:3, 2:1 and 3:1). Biomethane produced was collected continuously into a gas bag and analyzed using Gas Chromatography. One-Factor-at-A-Time was used to select TEMP, TSC and FIR for Central Composite Design of experiment to obtain optimal conditions that maximize the yield of biogas (Y1), biomethane content (Y2) and minimize the hydraulic retention time (Y3). Kinetic parameters of the process were estimated. Maximum yields (%) were obtained in API having the range 43.5-65.5; 65.5-69.5 and 50.1-66.8 for TSC, FIR and TEMP, respectively. Maximum of 7.2 kg (Y1), 71.54% (Y2) and 8 days (Y3) were obtained at optimum conditions TEMP (55.2Ă?ÂșC), TSC (6.25%) and FIR (1:2). MG model best fitted the experimental data. Use of pineapple waste as a co-substrate is more productive in biomethanation. Operating variables enhanced biomethanation.

Biography :

Email: oaaworanti@lautech.edu.ng

Top