Journal of Physical Chemistry & Biophysics
Open Access
ISSN: 2161-0398
+44 1478 350008
ISSN: 2161-0398
+44 1478 350008
Wei Li Zhang
University of Electronic Science & Technology of China, China
Posters-Accepted Abstracts: J Phys Chem Biophys
The idea of making random lasers in one dimensional optical structures, such as optical fibers, has arisen great interests in the research world, because that the waveguide function provided by optical fibers help to reduce lasing threshold as well as to enhance emission directionality. Random distributed feedback fiber laser (RDF-FL) is a novel type of random laser reported by Turistsyn et al. based on a roll of single-mode fiber (SMF) in 2010. The SMF itself performs as the disorder medium, where Rayleigh backscattered (RS) radiation captured by fiber waveguide provides distributed feedback while the Raman pump provides optical amplification for generation of random lasing (RL). Compared with traditional random lasers, the RDF-FL shows relative stable output, single-transverse-mode profile, long-distance emission and wide wavelength tunability, which are of great interest in optical communication and optical sensing. To tune output wavelength of RDF-FLs, a passive component, i.e., a Fabry-Perot cavity combined with a LPFG based MZ interferometer, was designed to selectively feedback RS of a RDF-FL, and a novel all-fiber tunable multi-wavelength Raman fiber laser is achieved by us. To reduce the lasing threshold and design the output characteristics, a high nonlinear fiber, i.e., dispersion compensated fiber (DCF), with relative high Raman gain factor and RS was proposed to make RDF-FLs. Through combinations of SMF and DCF of varying length, the length and the lasing threshold of RDF-FL can be reduced remarkably when DCF is inserted at some position in the lasing cavity. Moreover, power distribution and spectrum of RDF-FL can be designed by controlling the length and the position of the DCF. Besides Raman gain, it is also possible to provide gain through active fibers, such as Er-doped fiber (EDF). In our studies, single-peak random lasing can be realized in a completely-opened cavity through pumping of both the EDF and the SMF. Combination of EDF and Raman amplifications helps to reduce the requirement of a unique pump for stable random lasing, as well as to reduce (increase) the threshold (output) power of RDF-FL. What�s more, random lasing with novel output characteristics, (i.e., stable single-peak random lasing and transitional variation between chaotic and stable states) are observed. In EDF, random distributed feedback can also be provided by inscription of randomly separated fiber Bragg gratings (FBGs), which usually generate unstable RL modes competition. In our case, a laterally-injected control light is used to induce local gain perturbation, providing additional seed light for certain random resonance modes. As a result, active mode selection of this type of RDF-FL is realized by changing locations of the laser cavity that is exposed to the control light.
Email: wl_zhang@uestc.edu.cn